info@authorizeservicecenter.com +91 804 854 2013 +91 1800 30 92899
Header-logo
  • SZ Enterprises, No.-22 First Floor, Krishnappa 80 Feet Rd, Deepika Layout Gubalala, Bangalore, Karnataka - 560061

U.F. / E.D.I.

img
img
img

U.F. / E.D.I.

Ultra filtration unit is basically a filtering process and is the best pre-treatment process for R.O systems. It is a prime unit in MBR systems retaining precious bacteria acclimatized for a specific COD in effluent. Ultra filtration technique is used either independently in the water treatment or prior to R.O in water recycling. We use, as need be, Hollow Fiber, PAN, PVDF Electrocoat, PES and Flat sheet membrane elements. These membrane modules are of 0.01 micron pore size and act as barrier for chemicals, bacteria, viruses and other microorganisms. All these particles with larger diameter than the membrane pore size will be filtered of. To produce water with less than 0.1 NTU turbidity and free of organic matter U.F shows an excellent filtration capability.

Chlorination is known as one of the best techniques for removing microbiological contamination in drinking water but the key lies in right dosage during operation. This as a disinfectant has a considerable effect on the removal of microorganisms, albeit not 100%, as some species such as microorganisms can withstand. Such microorganisms can be held with ultra filtration membranes.

This is possible since pore diameter of ultra filtration membranes, we use, is smaller than the diameter of microorganisms in and it ensures the desired result. Chlorine with organic substances contained in the water, forms compounds, THM (trihalomethane) having toxic effects on the human body causing irreversible disorder. Hence ultra filtration usage has the most significant advantage in water treatment as it does not produce any such products, which otherwise are generated in chlorine oxidation.

UF modules are perfect for filtration in shallow effluent waters over conventional biological and chemical treatment prior to reverse osmosis systems enabling recycling of waste water to use back in the process. It is ideal in sea water desalination as pre treatment before RO. UF systems are also extensively used in, food and beverage industry and natural drinking water treatment plants to remove bacteria and along with disinfection.

STANDARD FEATURES

FRP membrane housing


ST37 epoxy painted carbon steel or AISI 304 stainless steel frame
5 micron cartridge filtration


Low pressure line U-PVC PN16
The high pressure line or Duplex Stainless Steel aısı316t
Check electric actuated butterfly valve
Low and High pressure switch
Clean and waste water flow meters
Glycerin manometers
Product water conductivity meter (0-2000μs/cm)
Introduction and product water pH Meter (optional)
On-Off switch

Alarm and status lights
380 v/50hz/3ph
IP56 control panel

Recommended inlet Water Limits are: TDS: 38.000 to 41.000 ppm

Operating pressure: 50 to 70 bar

Water pressure: 2 to 5 bar

Inlet water pH range: 6 - 8

Silica (SiO2) Tolerance 25 ppm max. @ 60% efficiency

Max. Check water temperature = 30 º C.

Max Iron (Fe) 0.05 ppm tolerance, with Anti-scalant dosage

0.2 ppm Hydrogen Sulphide should be.

Turbidity should be. (NTU <1)

KEY APPLICATIONS

High pressure boiler make-up for power generation etc.

WFI (water for injection in pharmaceutical industry

Semiconductors manufacturing process

Other high end applications.

KEY FEATURES

Single skid configuration

90% to 95% recovery

Allen Bradley PLC with panel view 600 HMI

High hardness feed

ELECTRODEIONIZATION (FEDI)

We offer a wide range of sizes, materials of construction and configurations to meet all the required water parameters from EDI. Our EDI units are salt free and do not require external salt dosing. They can be ordered either as a stand-alone unit or integrated into the most complex of deionised water control systems.

The Electro-deionization process uses electric current to treat (polish) desalinated water from RO systems etc., to ultra-pure standards required for many critical applications. EDI water systems will replace the conventional Mixed Bed Polishers and provide several advantages including:

Lower capital and installation costs

Easy to maintain

Regeneration not required

No handling of harsh chemicals

Smaller footprint

Electrodeionization Standard Features

Single skid configuration

PVC piping

Conductivity analyzer on product

Flow meter on feed, product and concentrate

Cleaning connections

Power rectifier for DC power source

90% to 95% recovery

Nema 4 carbon steel local junction box